How to connect the injection holder to PTFE Tubing


Step1

1. Draw PTFE Tubing (CT-1) through the locking nut.

Step2

2. Ream the end of PTFE Tubing useing a sharp-edged tool such as an eyeleteer.

Step3

3. Fit the reamed end of PTFE Tubing into the rear end (A) of the injection holder just before the end thread.

Step4
Step5

4. Screw down the locking nut firmly against the end thread.

Back


Copyright © NARISHIGE Group. All Rights Reserved. 1999-2024